Command and Processes Table - R
For more information on the terms 'Command', 'Process' and 'Macro Command', see Command Table Introduction.
These tables list all commands and processes available in all products. If your product has access to a command or process, the link on the left of the table takes you to a dedicated help file for more information. If no link appears, the function isn't available in your product.
Symbols used in this table:
A green tick indicates that the module is part of the core system licensing for the specified product - no additional module is required.
X A red cross indicates the module is not part of the listed system and any commands held within it cannot be run (a separate product will be required).
� A blue diamond indicates the module is an optional extra for the specified system.
For Macro commands, see here.
Commands - R
Process Name |
|
|
|
|
|
|
|
|
|
Description |
More Help |
X |
X |
X |
X |
X |
|
X |
X |
X |
Make ramp connecting two points, according to supplied criteria. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Make ramp connecting three points, according to supplied criteria. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Modify string so that its end tangentially fits another string. |
||
|
|
|
|
|
|
|
Modify string so that its end tangentially fits another string. |
Command Help | |||
|
|
|
|
|
|
|
Draws a rectangle with a center point and a corner point selected interactively. |
Command Help | |||
|
|
|
|
|
|
|
Draws a rectangle with a center point and a corner point selected interactively. |
Command Help | |||
|
|
|
|
|
|
|
Redo the previous undo command |
Command Help | |||
|
|
|
|
|
|
|
Redraws currently displayed object overlays. |
Command Help | |||
|
|
|
|
|
|
|
Redraw string data according to a nominated numeric data column from which a sequence of drawing can be determined. |
Command Help | |||
|
|
|
|
|
|
|
Reduces the number of points in a string by the percentage set using the reduction-percentage command. |
Command Help | |||
|
|
|
|
|
|
|
Used in conjunction with the reduce-points command. Specifies the percentage reduction. |
Command Help | |||
|
|
|
|
|
|
|
Removes string crossovers in the current view plane. |
Command Help | |||
|
|
|
|
|
|
|
Interactively rename drill holes. |
Command Help | |||
|
|
|
|
|
|
|
Reposition a SiroTIFFimage in the XYZ axes |
Command Help | |||
X |
X |
X |
X |
X |
X |
X |
X |
|
Reset the current map georeferencing, returning the map to local coordinates. |
Command Help | |
|
|
|
|
|
|
|
Resolves points from one string onto those of another string within a defined tolerance. |
Command Help | |||
X |
X |
|
X |
X |
X |
X |
X |
Annotate perimeters with corresponding field value in results file. |
|||
|
|
|
|
|
|
|
Reverses the order of points for selected strings. |
Command Help | |||
|
|
|
|
|
|
|
Reverse the current view direction. |
Command Help | |||
X |
X |
X |
X |
X |
|
X |
X |
X |
Toggle the display of the Drillhole Parameters dialog on drillhole creation. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Reposition the drill relative to the rig center. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Move the drill rig within the drill drift outline. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Determine if a drill rig can be brought into position in plan view. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Toggles rig direction. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Create a Section Definition file from strings intersecting the view plane. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Toggles the use of snapping when positioning hole toe positions. |
||
X |
X |
X |
X |
X |
|
X |
X |
X |
Creates an intersecting road layout from two intersecting strings. |
||
X |
X |
|
X |
X |
|
|
X |
Berm tapering will gradually reduce the width of the berm where the berm meets the road in an open pit design. |
|||
X |
X |
|
X |
X |
|
|
X |
Toggles the use of tapering in road berm creation. |
|||
X |
X |
|
X |
X |
|
|
X |
Generate a road design string between two existing contours. |
|||
X |
X |
|
X |
X |
|
|
X |
Generate a road design string from an existing perimeter. |
|||
X |
X |
X |
X |
X |
|
X |
X |
X |
Creates an intersecting road layout from two intersecting strings. |
||
X |
X |
|
X |
X |
X |
|
X |
Interactively experiment with different road layouts over a pit wireframe, using the Ramp Layout tool. |
|||
X |
X |
|
X |
X |
|
|
X |
Set colour for road strings in open pit design. |
|||
X |
X |
X |
X |
X |
|
|
X |
|
Set color for roof strings in underground mine design. |
||
|
|
|
|
|
|
|
Rotates a string interactively about a fixed anchor point. |
Command Help | |||
|
|
|
|
|
|
|
Rotates the selected string(s) in the current view plane, about a selected point, by a specified angle. |
Command Help | |||
|
|
|
|
|
|
|
Rotates a string about a selected point in the current view plane to a specified azimuth. |
Command Help | |||
|
|
|
|
|
|
X |
Interactive command for rotating a wireframe object using defined rotation angle and rotation point settings. |
Processes - R